Vivid Audio Moya M1 Vivid Audio, March 21, 2024

MOYA M1

The Moya M1 was born of circumstance. Quarantined in a hotel room for 10 days by the global pandemic, Laurence Dickie began to sketch out an idea for a speaker that could do it all.

Physically, that concept would evolve many times through the R&D phase but the vision remained unchanged: the non plus ultra of loudspeakers, able to handle anything with aplomb. A loudspeaker so imbued with power and authority, particularly from the lower frequencies, that it could deliver any and all types of music with effortless grace.

As the Vivid Audio team went into test phase, the design of the Moya began to take shape. An imposing stack of bass drivers became the dominant feature of the curvaceous design. Early results reaffirmed the observation that an extended low frequency range actually helps with the overall perspective of the entire frequency range.

Of course, a loudspeaker is much more than just the bass, but the low frequency section does play an outsized role. Most importantly, it sets the system efficiency and, since it is relatively straightforward to create high efficiency mid-band drivers, these have to be attenuated back to the level set by the bass.

PUSHING THE ENVELOPE

“In most loudspeakers, the bass section determines performance, as far as the laws of physics will allow.

A cone moving this far at this frequency will supply so many dBs and no more. The length of the linear electromagnetic ‘push’ is set by the length of the voice coil and magnetic gap. Not far behind is the suspension design which eventually pulls tight and stops further movement.

Therefore, to increase the volume of air being moved, you must increase the cone area. Every doubling in cone area creates three more dBs, or, for the same level, a halving of the cone excursion.
The more cone area you can have, the smaller the cone displacement and the easier the loudspeaker has it – hence ‘effortless’.

With its 45mm magnetic gap, the C225 driver is no slouch but reducing the excursion by a factor of eight through the use of eight drivers means that they’re just ticking over while you enjoy a massive auditory slam.”

Basın Bülteni Dökümanları

Vivid_Audio-Moya_M1-e_brochure.pdf

Websitesi Adresi

https://vividaudio.com/
More Press Releases
April 16, 2025
Shanling Audio
Introducing Shanling M3 Plus
M3 Plus comes with our brand-new curvy design and larger 4.7-inch display, fitting it into aluminium body that’s a little bit taller and slightly thicker than its predecessors. But this small increase in dimensions opened a whole new level of audio performance for the M3 Plus, thanks to a quad DAC design, utilizing four units of Cirrus Logic CS43198. We also significantly improved its balanced headphone output, with a pair of SGM8262 amplifiers now offering up to 800mW @ 32Ohm!
Devamı
March 19, 2025
TAD
TADL ANNOUNCES TAD-M2500TX EVOLUTION-SERIES POWER AMPLIFIER LOADED WITH UPGRADED FEATURES AND PERFORMANCE
Technical Audio Devices Laboratories, Inc., today announced the TAD-M2500TX two-channel power amplifier as the newest addition to its Evolution Series of hi-fi audio components. The TAD-M2500TX power amplifier boasts a completely redesigned circuit layout, upgraded power transformers, and a redesigned machined aluminum chassis, and provides 550 watts of power per channel at 4 ohms. When connected to TAD speakers in the Evolution Series, the M2500TX delivers powerful sound with exceptional clari
Devamı
May 7, 2024
Chord
Suzi amplifiers unveiled at HIGH END 2024
Designed by John Franks, the Suzi concept includes a new preamp, plus an innovative ULTIMA-tech modular power amplifier that can be used to form a conventional pre/power, or used separately with our Hugo 2 DAC or the Hugo 2/2go streamer/player to create a DAC/amplifier or a streaming amplifier.
Devamı
TAKİP EDİN