First Watt SIT-4
First Watt,
October 24, 2023
The SIT-4 is the First Watt power amplifier using the industrial grade Static Induction Transistors. It is preceded by the ground breaking SIT-1, 2, and 3 and follows their technical philosophy and construction.

An important difference in the SIT-4 is the SIT device itself. The previous three designs used Silicon Carbide to make a custom vertical power Jfet with a low impedance Drain whose character nicely emulated a power Triode tube, but directly operating at the current and voltage that would drive loudspeakers without the requirement for an output transformer. SITs lend themselves to high quality audio performance with very simple Class A circuits with little or no dependence on other active circuit elements or negative feedback. The Common Source mode SIT-1 could do the job surrounded by only passive elements, and the SIT-2 required only bias from a current source. The SIT-3 upped the game with Common Drain design biased by a novel Pass circuit, MUFF (Mu Follower/Follower). The SIT-4 follows in the Common Source footsteps but ups the game with an industrial SIT. The SIT-1/2/3 gain transistors were rated at a few amps and about 50 watts dissipation. This amplifier uses a Tokin THF51s rated at 600 volts, 30 amps and 400 watts. As a practical matter, the limitations of the SIT-4 circuit are the size of the heat sinks. And this big Jfet manages a bandwidth of 50 megaHertz… The circuit of the SIT-4 is simple. Q1 is a new-old-stock Toshiba 2SK170 which drives the Gate of the Q2 SIT, whose output is biased by a mu-follower current source Q3.
Documentos de Comunicado de Prensa
Dirección del Sitio Web
https://www.firstwatt.com/
More Press Releases
July 2, 2024
PS Audio
Aspen FR5 Loudspeaker
The ground-breaking Aspen series of loudspeakers sets new standards for what is possible in home audio reproduction. Now, with the introduction of our full range 2-way stand mount speaker, the Aspen FR5, it is finally possible to bring the concert hall to any small to medium sized room.
Leer más
May 5, 2023
YG Acoustics
Reference 3 debuts at Munich High End 2023
YG Acoustics is pleased to announce Reference 3, the third version of their Reference range, setting new standards in accuracy and musicality.
Leer más
August 20, 2024
Cayin
Introducing iHA-8: A Departure from Tubes, But with POWERS!
Featuring our exclusive Hyper Mode, the iHA-8 delivers a powerful output that will meet the demands of your hard-to-drive ones.
Curious about a different sound compared to our legacy tube amplifiers? The iHA-8 is your answer. For an enhanced audio experience, pair it with the iDAC-8, which combines tube warmth with precision!
Leer más