A block of 2017 Duralumin carved out housing!

RTP-2, 4 and 6 ultimate`s box is made from 2017 Duralumin, which has the best vibration declining characteristics and excellent sound quality. A block of 2017 Duralumin has been carved out into a luxury structured box.

OYAIDE`s special version Beryllium copper electrode adopted R-1 for receptacle!

For RTP-2, 4 and 6 ultimate`s receptacles, we adopted the OYAIDE`S R-1 special version. R-1`s electrode material is made from Beryllium copper, which has the best conduct characteristic.

The electrodes surface have been mirror polish finish to further improve conduct characteristic. We at ACOUSTIC REVIVE have changed the electrode parts to thick silver plating and thick rhodium plating which has the best conduct characteristic and phase characteristic and only the electrode parts have been Super cryogenic treated (-196oC) to improve conduct characteristic to the limit.

Most of Super cryogenic treated receptacles get treated by whole receptacles. But because the shrinkage rate is different, resin parts get damage and deteriorated and product and sound quality get destroyed badly. This is why we at ACOUSTIC REIVE only treat the conduct parts.

Comparison of metal materials vibration decrement characteristic.

Block carved out structure has far better vibration declining characteristic, sound quality and less distortion compared with thick metal sheet bolted together into a box. 

The boxes maximum thickness is 25mm, so not only it has a excellent vibration declining characteristic, it also total shut out any noise from getting inside, which lead to overwhelming S/N ratio.

Eliminates noise and static electricity non-contact and non-magnetism!

RTP-2, 4 and 6 ultimate`s box is filled with Green carborundum, Tourmaline powder and natural quartz powder to eliminate noise and static electricity without no contact and non-magnetism. Most of power supply box uses series type noise filter. But series type filter transfers noise elements to heat by magnet which not only absorbs noise, it also absorbs important electrical energy. Also the magnetic body produces magnetic distortion by the noise absorption which adds a distorted feel and thinness to the sound. This is because an electromagnetic wave absorbent material itself is a strong magnetic body. Also parallel type noise filter or choke coil can not avoid loss in transmission energy. It eliminates noise buy it takes away feeling of restraint and energy feel from the sound.

Green carborundum has no side effects because it non-magnetic body. It only absorbs electromagnetic wave noise which is produced from receptacles and internal wiring. Green carborundum is the only electromagnetic wave absorbent material which improves sound quality and S/N ratio. Also the Tourmaline powder releases negative ion and keep the amount static electricity very low. The natural quartz powder releases far infrared rays which has an surface activation effect. This leads to very realistic and sound filled with a feeling of throbbing pulse.

Carved out brass foot with epoch-making vibration control material!

Underneath the RTP-2, 4 and 6 ultimate`s box, there are brass carved out large foot, white are height adjustable. Combination of 2017 Duralumin box and brass foot will eliminate both materials resonance frequency. To further improve vibration control effect, the vibration control sheet in placed underneath the brass foot.

"fo. Q" is a sound quality adjustment material developed by professor Masao Sumita at Tokyo Institute of Technology by getting a Pre-venture support from JST (Japan Science and Technology Agency). It is a epoch-making material and carries an overwhelming vibration control characteristic. It transfers and eliminates vibration energy from electrical energy to heat energy. Combination of Duralumin, brass and leads to the ultimate vibration control structure. 

OYAIDE`s special version Beryllium copper electrode adopted R-1 for receptacle!

For RTP-2, 4 and 6 ultimate`s receptacles, we adopted the OYAIDE`S R-1 special version. R-1`s electrode material is made from Beryllium copper, which has the best conduct characteristic. The electrodes surface have been mirror polish finish to further improve conduct characteristic. We at ACOUSTIC REVIVE have changed the electrode parts to thick silver plating and thick rhodium plating which has the best conduct characteristic and phase characteristic and only the electrode parts have been Super cryogenic treated (-196oC) to improve conduct characteristic to the limit.

Most of Super cryogenic treated receptacles get treated by whole receptacles. But because the shrinkage rate is different, resin parts get damage and deteriorated and product and sound quality get destroyed badly. This is why we at ACOUSTIC REVIVE only treat the conduct parts.

The ultimate material for power supply inlet and internal wiring too!

We adopted the ultimate power supply inlet and internal wiring for RTP-2, 4 and 6 ultimate. Same as receptacles, power supply inlet has been Super cryogenic treated and treated with thick silver plating and thick rhodium plating.

The inlet wiring connection is non-solder. We at ACOUSTIC REVIVE does not adopt solder because it destroys transmission badly. For internal wiring, we adopted the FURUKAWA Electrical Industry’s oval shaped very thick PCOCC-A which as the ultimate conduct characteristic. PCOCC-A is a annealed version of PCOCC (single crystal copper) manufactured by the high technology of FURUKAWA Electrical Industry. Not only PCOCC-A has a better conduct characteristics then PCOCC (Please look at the PCOCC-A & PCOCC comparison list), because it originally is a single core crystal, the chance of impurities getting inside is very low even it gets annealed.

So at end it has a far better conduct characteristic and higher purity then high purity conductor such as 6N. This high conduct character PCOCC-A is made into oval shaped single core which has no peaky and distorted feel to sound quality compared with round, rectangle, flat shaped conductor. 

Beautiful finish improving sound quality and keeping product quality in long term.

To keep the product quality and sound quality in long term, the 2017 Duralumin made box is treated top quality pear surfaced Snow White Aumite, and lid is treated with top quality Black Hair Line finish.

The brass food is treated with top quality mirror surface finish Chrome plating. A product using non-surface treated Aluminum alloy and Brass releases rust which is harmful to human body, so please be careful.

A block of 2017 Duralumin carved out housing!

RTP-2, 4 and 6 ultimate`s box is made from 2017 Duralumin, which has the best vibration declining characteristics and excellent sound quality. A block of 2017 Duralumin has been carved out into a luxury structured box.

OYAIDE`s special version Beryllium copper electrode adopted R-1 for receptacle!

For RTP-2, 4 and 6 ultimate`s receptacles, we adopted the OYAIDE`S R-1 special version. R-1`s electrode material is made from Beryllium copper, which has the best conduct characteristic.

The electrodes surface have been mirror polish finish to further improve conduct characteristic. We at ACOUSTIC REVIVE have changed the electrode parts to thick silver plating and thick rhodium plating which has the best conduct characteristic and phase characteristic and only the electrode parts have been Super cryogenic treated (-196oC) to improve conduct characteristic to the limit.

Most of Super cryogenic treated receptacles get treated by whole receptacles. But because the shrinkage rate is different, resin parts get damage and deteriorated and product and sound quality get destroyed badly. This is why we at ACOUSTIC REIVE only treat the conduct parts.

Comparison of metal materials vibration decrement characteristic.

Block carved out structure has far better vibration declining characteristic, sound quality and less distortion compared with thick metal sheet bolted together into a box. 

The boxes maximum thickness is 25mm, so not only it has a excellent vibration declining characteristic, it also total shut out any noise from getting inside, which lead to overwhelming S/N ratio.

Eliminates noise and static electricity non-contact and non-magnetism!

RTP-2, 4 and 6 ultimate`s box is filled with Green carborundum, Tourmaline powder and natural quartz powder to eliminate noise and static electricity without no contact and non-magnetism. Most of power supply box uses series type noise filter. But series type filter transfers noise elements to heat by magnet which not only absorbs noise, it also absorbs important electrical energy. Also the magnetic body produces magnetic distortion by the noise absorption which adds a distorted feel and thinness to the sound. This is because an electromagnetic wave absorbent material itself is a strong magnetic body. Also parallel type noise filter or choke coil can not avoid loss in transmission energy. It eliminates noise buy it takes away feeling of restraint and energy feel from the sound.

Green carborundum has no side effects because it non-magnetic body. It only absorbs electromagnetic wave noise which is produced from receptacles and internal wiring. Green carborundum is the only electromagnetic wave absorbent material which improves sound quality and S/N ratio. Also the Tourmaline powder releases negative ion and keep the amount static electricity very low. The natural quartz powder releases far infrared rays which has an surface activation effect. This leads to very realistic and sound filled with a feeling of throbbing pulse.

Carved out brass foot with epoch-making vibration control material!

Underneath the RTP-2, 4 and 6 ultimate`s box, there are brass carved out large foot, white are height adjustable. Combination of 2017 Duralumin box and brass foot will eliminate both materials resonance frequency. To further improve vibration control effect, the vibration control sheet in placed underneath the brass foot.

"fo.Q" is a sound quality adjustment material developed by professor Masao Sumita at Tokyo Institute of Technology by getting a Pre-venture support from JST (Japan Science and Technology Agency). It is a epoch-making material and carries an overwhelming vibration control characteristic. It transfers and eliminates vibration energy from electrical energy to heat energy. Combination of Duralumin, brass and leads to the ultimate vibration control structure. 

OYAIDE`s special version Beryllium copper electrode adopted R-1 for receptacle!

For RTP-2, 4 and 6 ultimate`s receptacles, we adopted the OYAIDE`S R-1 special version. R-1`s electrode material is made from Beryllium copper, which has the best conduct characteristic. The electrodes surface have been mirror polish finish to further improve conduct characteristic. We at ACOUSTIC REVIVE have changed the electrode parts to thick silver plating and thick rhodium plating which has the best conduct characteristic and phase characteristic and only the electrode parts have been Super cryogenic treated (-196oC) to improve conduct characteristic to the limit.

Most of Super cryogenic treated receptacles get treated by whole receptacles. But because the shrinkage rate is different, resin parts get damage and deteriorated and product and sound quality get destroyed badly. This is why we at ACOUSTIC REVIVE only treat the conduct parts.

The ultimate material for power supply inlet and internal wiring too!

We adopted the ultimate power supply inlet and internal wiring for RTP-2, 4 and 6 ultimate. Same as receptacles, power supply inlet has been Super cryogenic treated and treated with thick silver plating and thick rhodium plating.

The inlet wiring connection is non-solder. We at ACOUSTIC REVIVE does not adopt solder because it destroys transmission badly. For internal wiring, we adopted the FURUKAWA Electrical Industry’s oval shaped very thick PCOCC-A which as the ultimate conduct characteristic. PCOCC-A is a annealed version of PCOCC (single crystal copper) manufactured by the high technology of FURUKAWA Electrical Industry. Not only PCOCC-A has a better conduct characteristics then PCOCC (Please look at the PCOCC-A & PCOCC comparison list), because it originally is a single core crystal, the chance of impurities getting inside is very low even it gets annealed.

So at end it has a far better conduct characteristic and higher purity then high purity conductor such as 6N. This high conduct character PCOCC-A is made into oval shaped single core which has no peaky and distorted feel to sound quality compared with round, rectangle, flat shaped conductor. 

Beautiful finish improving sound quality and keeping product quality in long term.

To keep the product quality and sound quality in long term, the 2017 Duralumin made box is treated top quality pear surfaced Snow White Aumite, and lid is treated with top quality Black Hair Line finish.

The brass food is treated with top quality mirror surface finish Chrome plating. A product using non-surface treated Aluminum alloy and Brass releases rust which is harmful to human body, so please be careful.

2017 Duralumin'in bir bloğu konut oydu!

RTP-2, 4 ve 6 ultimate'ın kutusu, en iyi titreşim azaltma özelliklerine ve mükemmel ses kalitesine sahip 2017 Duralumin'den yapılmıştır. 2017 Duralumin'in bir bloğu lüks yapılı bir kutuya oyulmuştur.

OYAIDE'nin özel versiyonu Berilyum bakır elektrot, kap için R-1'i benimsedi!

RTP-2, 4 ve 6 ultimate'ın kapları için OYAIDE'nin R-1 özel versiyonunu kullandık. R-1'in elektrot malzemesi, en iyi davranış özelliğine sahip olan Berilyum bakırdan yapılmıştır.

Elektrotların yüzeyi, davranış karakteristiklerini daha da geliştirmek için ayna cilası kaplaması yapılmıştır. ACOUSTIC REVIVE olarak, elektrot parçalarını en iyi davranış karakteristiğine ve faz karakteristiğine sahip kalın gümüş kaplama ve kalın rodyum kaplama olarak değiştirdik ve sadece elektrot parçaları Süper kriyojenik muamele gördü (-196oC) davranış karakteristiklerini sınıra kadar iyileştirmek için.

Süper kriyojenik tedavi edilmiş kapların çoğu, tüm kaplar tarafından tedavi edilir. Ancak büzülme hızı farklı olduğu için, reçine parçalar hasar görür ve bozulur ve ürün ve ses kalitesi kötü bir şekilde tahrip olur. Bu nedenle ACOUSTIC REIVE'de sadece iletken parçaları işliyoruz.

Metal malzemelerin titreşim azaltma karakteristiğinin karşılaştırılması.

Blok oyma yapı, bir kutu halinde bir araya getirilmiş kalın metal saca kıyasla çok daha iyi titreşim azaltma özelliğine, ses kalitesine ve daha az bozulmaya sahiptir.

Kutuların maksimum kalınlığı 25 mm'dir, bu nedenle sadece mükemmel bir titreşim azaltma özelliğine sahip olmakla kalmaz, aynı zamanda içeri giren herhangi bir gürültüyü de tamamen kapatır ve bu da ezici S / N oranına yol açar.

Gürültü ve statik elektriği temassız ve manyetizmadan ortadan kaldırır!

RTP-2, 4 ve 6 ultimate'ın kutusu, temas etmeden ve manyetizma olmadan gürültü ve statik elektriği ortadan kaldırmak için Yeşil karborundum, Turmalin tozu ve doğal kuvars tozu ile doldurulur. Güç kaynağı kutusunun çoğu seri tip gürültü filtresi kullanır. Ancak seri tip filtre, gürültü elemanlarını sadece gürültüyü emmekle kalmayıp aynı zamanda önemli elektrik enerjisini de emen mıknatısla ısıya aktarır. Ayrıca manyetik gövde, gürültü emilimi ile manyetik bozulma üretir ve bu da sese çarpık bir his ve incelik katar. Bunun nedeni, elektromanyetik dalga emici bir malzemenin kendisinin güçlü bir manyetik cisim olmasıdır. Ayrıca paralel tip gürültü filtresi veya boğma bobini iletim enerjisinde kaybı önleyemez. Gürültüyü ortadan kaldırır, sesten kısıtlama ve enerji hissi hissini ortadan kaldırır.

Yeşil karborundumun hiçbir yan etkisi yoktur çünkü manyetik olmayan bir gövdeye sahiptir. Sadece kaplardan ve iç kablolardan üretilen elektromanyetik dalga gürültüsünü emer. Yeşil karborundum, ses kalitesini ve S / N oranını artıran tek elektromanyetik dalga emici malzemedir. Ayrıca Turmalin tozu negatif iyon açığa çıkarır ve statik elektrik miktarını çok düşük tutar. Doğal kuvars tozu, yüzey aktivasyon etkisine sahip uzak kızılötesi ışınları serbest bırakır. Bu, zonklayan nabız hissi ile dolu çok gerçekçi ve sese yol açar.

Çığır açan titreşim kontrol malzemesi ile oyulmuş pirinç ayak!

RTP-2, 4 ve 6 ultimate'ın kutusunun altında, büyük ayaktan oyulmuş pirinç vardır, beyaz yüksekliği ayarlanabilir. 2017 Duralumin kutu ve pirinç ayağın kombinasyonu, her iki malzemenin rezonans frekansını da ortadan kaldıracaktır. Titreşim kontrol etkisini daha da iyileştirmek için, titreşim kontrol sayfası pirinç ayağın altına yerleştirilir.

"Fo. Q", Tokyo Teknoloji Enstitüsü'nden profesör Masao Sumita tarafından JST'den (Japonya Bilim ve Teknoloji Ajansı) girişim öncesi destek alarak geliştirilen bir ses kalitesi ayarlama malzemesidir. Çığır açan bir malzemedir ve ezici bir titreşim kontrol özelliği taşır. Titreşim enerjisini elektrik enerjisinden ısı enerjisine aktarır ve ortadan kaldırır. Duralümin, pirinç kombinasyonu ve nihai titreşim kontrol yapısına yol açar. 

OYAIDE'nin özel versiyonu Berilyum bakır elektrot, kap için R-1'i benimsedi!

RTP-2, 4 ve 6 ultimate'ın kapları için OYAIDE'nin R-1 özel versiyonunu kullandık. R-1'in elektrot malzemesi, en iyi davranış özelliğine sahip olan Berilyum bakırdan yapılmıştır. Elektrotların yüzeyi, davranış karakteristiklerini daha da geliştirmek için ayna cilası kaplaması yapılmıştır. ACOUSTIC REVIVE olarak, elektrot parçalarını en iyi davranış karakteristiğine ve faz karakteristiğine sahip kalın gümüş kaplama ve kalın rodyum kaplama olarak değiştirdik ve sadece elektrot parçaları Süper kriyojenik muamele gördü (-196oC) davranış karakteristiklerini sınıra kadar iyileştirmek için.

Süper kriyojenik tedavi edilmiş kapların çoğu, tüm kaplar tarafından tedavi edilir. Ancak büzülme hızı farklı olduğu için, reçine parçalar hasar görür ve bozulur ve ürün ve ses kalitesi kötü bir şekilde tahrip olur. Bu nedenle ACOUSTIC REVIVE olarak sadece iletken parçaları işliyoruz.

Güç kaynağı girişi ve dahili kablolama için de mükemmel malzeme!

RTP-2, 4 ve 6 ultimate için nihai güç kaynağı girişini ve dahili kablolamayı benimsedik. Kaplarla aynı şekilde, güç kaynağı girişi Süper kriyojenik olarak işlenmiştir ve kalın gümüş kaplama ve kalın rodyum kaplama ile muamele edilmiştir.

Giriş kablolama bağlantısı lehimsizdir. ACOUSTIC REVIVE olarak lehimi benimsemeyiz çünkü iletimi kötü bir şekilde tahrip eder. İç kablolama için, FURUKAWA Elektrik Endüstrisi'nin oval şekilli çok kalın PCOCC-A'sını nihai davranış özelliği olarak benimsedik. POCC-A, FURUKAWA Elektrik Endüstrisinin yüksek teknolojisi ile üretilen PCOCC'nin (tek kristal bakır) tavlanmış bir versiyonudur. Sadece PCOCC-A, PCOCC'den daha iyi bir davranış özelliklerine sahip değildir (Lütfen PCOCC-A & PCOCC karşılaştırma listesine bakın), çünkü başlangıçta tek çekirdekli bir kristaldir, safsızlıkların içeri girme şansı tavlansa bile çok düşüktür.

Böylece sonunda, 6N gibi yüksek saflıkta iletkenden çok daha iyi bir davranış karakteristiğine ve daha yüksek saflığa sahiptir. Bu yüksek iletken karakter PCOCC-A, yuvarlak, dikdörtgen, düz şekilli iletkene kıyasla ses kalitesine tepe noktası ve çarpık bir his vermeyen oval şekilli tek çekirdekli hale getirilmiştir. 

Ses kalitesini artıran ve ürün kalitesini uzun vadede tutan güzel kaplama.

ses kalitesini uzun vadede korumak için, 2017 Duralumin yapımı kutuya en kaliteli armut yüzeyli Kar Beyazı Aumite işlenir ve kapak en kaliteli Siyah Saç Hattı kaplaması ile işlenir.

Pirinç gıda, en kaliteli ayna yüzeyi Krom kaplama ile muamele edilir. Yüzeye işlenmemiş Alüminyum alaşımı ve Pirinç kullanan bir ürün, insan vücuduna zararlı olan pası serbest bırakır, bu nedenle lütfen dikkatli olun.